Media center report
Chemours Products, Teflon Coatings, and TiO2: An Honest FAQ From Someone Who Buys This Stuff
A procurement admin's practical FAQ on Chemours products, Teflon coatings, Fusion Plus ceramic coatings, automated powder coating systems, and whether titanium dioxide is gluten free — from someone who actually places the orders.
-
1. What are Chemours products, and what do I actually buy from them?
-
2. Are Chemours Teflon coatings actually different from generic PTFE?
-
3. Fusion Plus ceramic coating vs. Teflon — what's the real difference?
-
4. Do automated powder coating systems ever pay off for a smaller operation?
-
5. Is titanium dioxide gluten free?
-
6. What should I check before switching a coating or pigment supplier?
-
7. What do I wish I'd asked before my first big Ti-Pure order?
I'm the office administrator for a 180-person manufacturing company. I manage facility and MRO procurement — roughly $340,000 a year across 14 vendors, including a couple of Chemours product lines. When I took over purchasing in 2020, I couldn't tell PTFE from PFA. I've made some expensive mistakes since then (more on that below). Here's what I actually know, and where I'm still guessing.
Questions covered below: What does Chemours still make? · Are Teflon coatings actually different? · Fusion Plus ceramic coating vs. PTFE · Are automated powder coating systems worth it? · Is titanium dioxide gluten free? · What to check before switching suppliers · What I wish I'd asked in 2021.
1. What are Chemours products, and what do I actually buy from them?
The short version: Chemours is the 2015 spin-off of DuPont's performance chemicals business. For a facility buyer like me, three product lines matter. Their Ti-Pure titanium dioxide pigments are the big one — used in paint, coatings, plastics, and paper. Teflon fluoropolymer coatings cover the non-stick and industrial coating side. And their refrigerants (Opteon, Freon) are what my HVAC guy keeps asking about.
The practical distinction is branded vs. generic. If you're doing anything with food contact, medical, or high-spec coating work, you're usually paying extra for the branded documentation trail. For purely structural applications, a generic blend often works fine — I've used both.
2. Are Chemours Teflon coatings actually different from generic PTFE?
Fairly, yes — though it depends on the application. Teflon is a brand name covering several fluoropolymers (PTFE, PFA, FEP, ETFE). Generic PTFE from other producers is chemically similar; the difference is consistency and documentation.
What matters to me as a buyer: Chemours completed its PFOA phase-out in 2015 under the EPA's PFOA Stewardship Program. That history is worth knowing because older inventory from any supplier can still carry legacy chemistry — check the SDS revision date, not just the receipt date. Where the brand earns its premium is in the paper trail: batch certifications, application notes tailored to your substrate, and someone to call when a coating fails in the field. For structural parts, generic is usually fine. For anything regulated, I don't gamble.
3. Fusion Plus ceramic coating vs. Teflon — what's the real difference?
Fusion Plus isn't a Chemours product — it's a ceramic (sol-gel SiO₂) coating brand, mostly in the automotive aftermarket. Ceramic coatings cure to a harder, more scratch-resistant film than PTFE, but they typically offer less non-stick performance and don't handle high heat the same way.
If someone is quoting you a ceramic coating for industrial equipment, ask three things: cure temperature and schedule (some need controlled oven curing, which you may not have), salt-spray hours per ASTM B117, and abrasion resistance per ASTM D4060. Ceramic sounds like a premium upgrade, and sometimes it is. But if your application is food-release or chemical resistance, a properly specified PTFE coating often outperforms it. Don't let the word "ceramic" close the conversation early.
4. Do automated powder coating systems ever pay off for a smaller operation?
Honestly, I don't have hard data on the exact break-even volume — I wish I'd tracked the numbers more carefully when we evaluated this in 2023. What I can say anecdotally: our manual booth with a decent electrostatic gun handled 200–500 small parts per shift without breaking a sweat. We only started looking at automation when a single customer program hit roughly 1,200 identical parts per week on a recurring schedule.
Below that, automation usually means a large capital hit, floor space you probably don't have, and a maintenance contract you didn't budget for. Above it, the labor savings and finish consistency are real. The middle of that range is genuinely murky — I'd run the numbers against your actual repeat volume, not your best month.
5. Is titanium dioxide gluten free?
Yes — this sounds like a strange question, but it's a real one now that "gluten free" is a label claim used on everything from paint brushes to vitamins. Titanium dioxide is a naturally occurring mineral oxide. Gluten is a protein found in wheat, barley, and rye. There's no mechanism by which TiO₂ could contain gluten unless something was added to it.
Under FDA gluten-free labeling rules (21 CFR 101.91), finished foods labeled "gluten-free" must contain less than 20 ppm gluten. TiO₂ as an ingredient clears that trivially. Two caveats worth flagging: the EU banned titanium dioxide as a food additive (E171) in 2022 based on genotoxicity concerns, while the FDA still permits it as a color additive under 21 CFR 73.575 with a cap of 1% by weight. That's a moving target — this was accurate as of early 2025, but check current market status before you reformulate anything.
6. What should I check before switching a coating or pigment supplier?
My checklist, refined through several hard lessons:
- Current SDS on file — required under OSHA's Hazard Communication Standard (29 CFR 1910.1200). Verify the revision date, not just that one exists.
- TSCA inventory status — if the chemical isn't on the EPA's TSCA inventory, you can't legally import or manufacture it in the US.
- Certificate of Analysis (CoA) per batch — not one from three years ago.
- Application support contact — who picks up the phone when a coating fails on a Friday afternoon?
- End-market compliance documents — food contact (FDA 21 CFR), aerospace (NADCAP), or medical ISO 10993, depending on where the part goes.
To be fair, some suppliers cover most of this well, and the paperwork burden isn't always worth switching away from. But the ones who can't produce an SDS on request aren't suppliers I keep.
7. What do I wish I'd asked before my first big Ti-Pure order?
In 2021 I switched TiO₂ suppliers to save about 8% on a 40,000 lb annual order — roughly $4,600 saved. The first two batches had inconsistent dispersion. Not catastrophic, but hiding power drifted enough that we had three rework runs and a very unpleasant call with our coating applicator. I still kick myself. If I'd asked for a sample batch and a CoA before committing, we'd have caught it.
Here's the thing: five years ago, my shortcut was probably close to best practice — match the spec sheet, negotiate the price, done. That doesn't fly in 2025. The PFOA phase-out reshaped what's acceptable in fluoropolymer supply, the EU E171 decision rattled the TiO₂ market, and SDS requirements have gone digital in most states. The fundamentals of good procurement haven't changed. The execution has, and it changes faster than most of us track it. Ask more questions upfront than you think you need to — you won't regret the extra week. You will regret the rework.
Download the 2025 crop protection report
Request the full report package with SDS routing notes, stewardship references, and methodology explanations for technical review.